 | K4 five axis machining center |
|---|
| project | unit | K4-125 | K4-180 | ||
| Five-axis workbench | Table size | mm | ø 125 | ø 180 | |
| The workbench bearing | Kg | Horizontal: 50, tilt: 30 | 80 | ||
| T slot size | mm | 12H7 | 10H7 | ||
| Processing range | The X axis range | mm | 600 | 600 | |
| Y range | 200 | 220 | |||
| The Z axis range | 260 | 260 | |||
| A shaft range | dec | + 110 ° | + 110 ° | ||
| C axis range | + 360 ° | + 360 ° | |||
| The spindle end face to the changing distance | The biggest | mm |
280 |
280 | |
| The minimum | 20 | 20 | |||
| The spindle | The spindle taper hole | / | BT30 | BT30 | |
| Speed (Max) | rpm | 24000 | 24000 | ||
| torque | Nm | 7.64 | 7.64 | ||
| power | kw | 10 | 10 | ||
| Knife library | The biggest tool length | mm | 135 | 135 | |
| Knife library form | / | Disc type manipulator knife library | Disc type manipulator knife library | ||
| Dao database is | the | 20 | 20 | ||
| The largest diameter cutter | With a knife | mm | 60 | 60 | |
| Adjacent empty knife | mm | 80 | 80 | ||
| Maximum tool weight | Kg | 3 | 3 | ||
| Tool change time | s | 1.2 (primary) | 1.2 (primary) | ||
| feed | A cutting feed speed range | m/min | 1-15 | 1-15 | |
| Fast moving speed | The X axis | m/min | 30 | 30 | |
| Y | |||||
| The Z axis | |||||
| Positioning accuracy | Positioning accuracy | The X axis | mm | 0.008 | 0.008 |
| Y | 0.008 | 0.008 | |||
| The Z axis | 0.008 | 0.008 | |||
| Repeat positioning accuracy | The X axis | 0.004 | 0.004 | ||
| Y | 0.004 | 0.004 | |||
| The Z axis | 0.004 | 0.004 | |||
| Numerical control system | / | The new generation of 200 ma - 5 | The new generation of 200 ma - 5 | ||
| Machine tool dimensions | long | mm | 2330 | 2330 | |
| wide | 1830 | 1830 | |||
| high | 2320 | 2320 | |||
| Air supply | Mpa | 0.6 | 0.6 | ||
| The total weight of machine tool | Kg | 3200 | 3200 | ||
